1. The main shaft action torque of the two-axis shredder is transferred to the whole frame of the equipment. Its design form and quality will directly determine the service effect and service life of the equipment. Market at present mainly six-party shaft keyway links and link two forms, carrying the six-party shaft torque is far higher than that of spline shaft, but the relative manufacturing processes is difficult due to its overall manufacturing than key link, use the six-party shaft can greatly improve the shear knife and axial force between in the process of crushing large ductile materials such as metals also won't appear the blade skid phenomenon caused by the damage of the spindle.
2. The main purpose of the reducer in the shredder is to reduce the speed and increase the torque. In a shredder, the speed decreases and the output torque increases. The torque output ratio is multiplied by the motor output (but cannot exceed the torque). Deceleration reduces the inertia of the load. The reduction in inertia is the deceleration ratio. The effect of square; Therefore, the combination of shredder and reducer makes the shredder have low torque and high torque, improving the production efficiency. Reducer transmission efficiency, low energy consumption, superior performance, high precision. If not used for maintenance and maintenance for a long time, due to one or another problem, it can also cause damage to the reducer.
3. Tear the main parts of the machine blade, in the running process of the blade, these clips can not be a bit loose, otherwise, not only affect the precision of the blade, but also will lead to grinding deviation seriously out of control. The important parts that affect the precision of the shredding machine blade also have tooth extractor, if the tooth extractor is not standard and accurate, it will directly affect the quality of the blade, and even affect the flexibility and reliability of tooth extractor in use.
4 bearing is an important part of the two-axis shredding machine, bearing smoothness is not good, will make the friction between the parts of each other become larger, constitute wear. So the metal shredder rotor bearing smooth operation to do a good job, the bearing outer ring skew smoothing agent to be timely quantitative correction uniform, smooth oil modification should cover up all roller appearance, coated after the position of the bearing outer ring recovery, also need to cover up with plastic film dust.
5. Two-axis shredding machine feeding uneven, first of all, to make the equipment feeding particle size is not uniform, to start from the front feeding control, uniform feeding is the key, the use of conveyor feeding, make the correct speed of feeding. Secondly, in order to make the shredding machine uniform material, shredding machine out of the mouth is also need to be spacious and smooth, regular cleaning inspection, so that the shredding material is not easy to card material. Later, the shredding machine motor should also be reasonably configured, the power of the motor is not the greater the better, many customers think that high power motor can improve its output, in fact, it is not so, too much motor power is easy to cause equipment failure.
Correctly grasp the role of the configuration between the parts of the two-axis shredding machine equipment, let the shredding machine equipment better for our use, Shuangxing Machinery has many years of experience in the production of two-axis shredding machine equipment, shredding machine equipment processing range is more widely suitable for all walks of life. Consult Shuangxing Machinery for more detailed information on double shaft shredder.